• <object id="nfpe0"></object>
  • <center id="nfpe0"><acronym id="nfpe0"></acronym></center>
  • <object id="nfpe0"></object>
  • <code id="nfpe0"><small id="nfpe0"><track id="nfpe0"></track></small></code>
  • <tr id="nfpe0"><option id="nfpe0"></option></tr>
    <code id="nfpe0"><em id="nfpe0"></em></code>

    Welcome to Hunan Dawning Filter System Technology Co., Ltd official website

    Hunan Dawning Filter System Technology Co., Ltd

    Committed water filtration system developing and producing since 2002

    TEL:+86-731-84391122

    Email:info@cncdfs.com

    A free consultation WeChat
    •  sand filter
    • Water collector
    • Controller
    • Pressure gauge

    Automatic backwash sand filter

    Water from rivers lakes, wells and be used by any irrigation system, including sprinkler irrigation, drip irrigation

    Email:info@cncdfs.com

    Principle

    In irrigation system, using three-dimensional filtration of sand, as primary filtration to deal with organic and inorganic impurities in water. Sand filters should be selected once the contents of organic impurities in the water is over 10mg/h.

     

    Features:

    1.High flow rate with low pressure loss.

    2.Modularized setting, compact, with less piping reducing the investment.

    3.One or multi-parallel filtration units are available according to the requirement of irrigation project.


    dmf (2).jpg

    The Filtering Process


    Filtering with media filters, also known as depth filtration, is done by filtering water through a thick layer of graded particles, called the filter bed. These particles can be sand, gravel or other granular materials. The filtration degree depends on the effective size of the bedding and the water velocity through the filter. 
    Raw water enters from the filter inlet (1) and percolates through the filter bed (2). Suspended materials come into contact and attach to the media particles. Clean water flows through the filtration nozzles (3) and out of the filter via the outlet valve (4). 
    The gradual dirt buildup in the filter bed causes an increase in the pressure differential across the filter and when it reaches its maximum design value, a cleaning process should be performed. In automatic media filter installations a pressure differential switch senses the pressure differential and when it reaches a preset value, the self cleaning process begins.   


    The Cleaning Process

    Cleaning is done by backwashing; pressurized water flows in reverse direction - from the nozzles upwards, causing suspension of the filter bed, thus releasing the suspended matter from the bedding. The dirt particles are then washed out of the filter through the back-flush valve. In automatic media filters installations the cleaning process is done by the system's controller. When the pressure differential switch senses that the differential pressure across the system reached a pre-set value, a signal is sent to the flushing controller and the self cleaning process begins.


    dmf (1).jpg

    Product features

    • Complete filtration solutions; Custom designed,manual or automatic backwash systems,

    • complete with manifolds, valves and controllers

    • Modularity and flexibility, wide range of vessel types and sizes(diameter 20”-48”) suitable for many filtration applications

    • High quality corrosion resistance vessels, inside and outside spray coating.

    • High efficiency; Advanced design for perfect water distribution during filtering and backwashing

    • All filters are rated to 1.0 Mpa.The water inlet pressure should be 0.2Mpa(Min.)

    • Various connection types, meeting all international standards.

    • Meets ISO 9001 standards


    Selection of data table

    irrigation sand filter.png

    On-site installation

    • Sand filter installation

      Sand filter installation

    • Pressure gauge

      Pressure gauge

    Share To:
     Back Back

    Related products recommended

    Online message ordering

    info@cncdfs.com
    info@cncdfs.com
    return
    Top
    跑得快真人版